One Finish

Gyprock One Finish is a pre-mixed acrylic compound designed to create a uniform surface on interior plasterboard or fibre cement walls and ceilings affected by critical lighting conditions.

Typical Applications

One Finish is rolled or sprayed directly onto the wall or ceiling, eliminating the need for trowel application. It is easy to sand, and where a level of final texture is acceptable, sanding is not required prior to the painting process. A polyester 10-12mm nap is recommended for general roller application, and the product should be allowed to dry for 16-24 hours prior to final painting and decoration. One Finish can also be applied onto already painted surfaces after lightly sanding.

Category: Surfacer, Jointing Compounds
Store availability: Cabramatta, Katoomba
Online Enquiry

One Finish reduces the difference in porosity, texture and sheen between board and jointing compound, to create a uniform white surface ready for decoration.

Due to its superior hiding power, it can be used as part of a level 5 finish specification under AS/NZS 2589.

Achieving a Level 5 Finish

The application of One Finish over a standard level 4 finish will improve the final surface and minimise the effects of critical light, however it will not automatically upgrade the work to a level 5 finish. A Level 5 Finish under AS/NZS 2589 cannot be achieved without a high degree of preparatory work, and this includes framing/substrate preparation to required tolerances. Visit the Levels of Finish page for more information about how to achieve a level 5 finish.

Product Options

Gyprock One Finish is available in a 20kg bucket with coverage of 5-7m2 per kg.

It has a shelf life of 1 year from date of manufacture.

For product availability and to place an order, contact your nearest supplier.

Physical & Chemical Properties

Specific gravity (H20=1) 1.6-2.0
VOC content (as specified by GBCA) 8g/L as VOC content per material

Product Manufacture

Gyprock One Finish is manufactured for CSR Gyprock in Australia to stringent product specifications.

Product Handling

Transportation and manual handling: Refer to the Gypsum Board Manufacturers of Australia (GBMA) website for recommended OH&S practices.

Storage: Store buckets in a dry environment out of direct sunlight. Remove lid and stir prior to use. Unused product should be stored by resealing the original bucket. Remix prior to use. Discard if drying has commenced.

Health and Safety

Safety Data Sheets are important documents in the construction industry and assist in the continuing focus on occupational health and safety on and off sites.

Installing to Standards

AS/NZS2589: Gypsum linings – Application and Finishing outlines the procedures for jointing and finishing of Gyprock plasterboard in conjunction with additional details contained in Gyprock Technical Literature.

Resources

Gyprock makes available resources that provide comprehensive selection, design, installation and maintenance guidance.

Product Enquiry

Would you like to know more about this product? Please fill out the form below and one of our freindly team members will get back to you shortly.