Pro-Repair 10

When you’re in a hurry reach for Gyprock Pro-Repair 10, a quick drying all-purpose jointing compound for use in repairs and on small-scale jointing jobs.

Typical Applications

Gyprock Pro-Repair 10 is typically used as all coats in a three coat jointing system, for plasterboard and fibre cement in smaller residential and commercial wall and ceiling jointing projects. It is also ideal for patching holes and defects. Hand application is recommended given the short working time.

Category: Repairs, Jointing Compounds
Store availability: Cabramatta, Katoomba
Online Enquiry

Pro-Repair 10 is a lightweight plaster based all-purpose compound used as all coats in a three coat jointing system or as a base coat only. this low VOC dry powder has been engineered with a super fast 10 minute working time after mixing. Use Pro-Repair 10 for all three coats with FibaFuse tape to ensure the project can be jointed and sanded on the same day after sufficient drying time.

Product Options

Gyprock Pro-Repair 10 is available in the following pack size:

Pack 8kg Bag
Coverage 13kg/100m2

Shelf life is 1 year from manufacture.

For product availability and to place an order, contact your nearest supplier.

Physical & Chemical Properties

Specific gravity (H20=1) 1.0 – 1.6
VOC content (as specified by GBCA) <1 g/L as VOC content per material

Product Manufacture

Gyprock Pro-Repair 10 is manufactured by CSR Gyprock in Australia to stringent product specifications.

Product Handling

Transportation and manual handling: Refer to the Gypsum Board Manufacturers of Australia (GBMA) website for recommended OH&S practices.

Storage: Store bags of compound in a dry environment, protected from the weather and out of direct sunlight. Tear bag open from top corner to dispense compound. Unused product which has been mixed with water should be discarded. Unused product in powder format should be stored in original bag: roll the top of the bag to loosely seal, and store in an airtight container.

Health and Safety

Safety Data Sheets are important documents in the construction industry and assist in the continuing focus on occupational health and safety on and off sites.

Installing to Standards

AS/NZS2589: Gypsum linings – Application and Finishing outlines the procedures for jointing and finishing of Gyprock plasterboard in conjunction with additional details contained in Gyprock Technical Literature.


Gyprock makes available resources that provide comprehensive selection, design, installation and maintenance guidance.

Product Enquiry

Would you like to know more about this product? Please fill out the form below and one of our freindly team members will get back to you shortly.