DIY Cornice Cement
Gyprock DIY Cornice Cement is used for fixing Gyprock cornice at wall and ceiling junctions where the substrate is plasterboard or fibre cement. It is also used for finishing cornice joints and mitres.
DIY Cornice Cement is typically used to install cornice between plasterboard walls and ceilings. It is also suitable for repairing existing cornice and cornice joints and is easily applied with a small broadknife.
DIY Cornice Cement is a setting type compound rather than a drying type that provides superior adhesion with good initial grab and high bond strength. It is available in powder form and is mixed with water to a workable paste with a working life of 50 – 60 minutes.
Freshen your style with Gyprock Cornice
The comprehensive Gyprock cornice range helps you add designer touch to any home. Whether you’re installing it yourself using Pre-mixed Cornice Cement or specifying a profile to your builder, you’re sure to find a style that brings character to the various spaces in your home.
Gyprock DIY Cornice Cement is available in 2.5kg bags with a shelf life of 1 year from date of manufacture.
For product availability and to place an order, contact your nearest supplier.
Physical & Chemical Properties
|Specific gravity (H20=1)||2.3-2.4|
|VOC content (as specified by GBCA)||< 10g/L as VOC content per material|
Gyprock DIY Cornice Cement is manufactured by CSR Gyprock in Australia to stringent product specifications.
Transportation and manual handling: Refer to the Gypsum Board Manufacturers of Australia (GBMA) website for recommended OH&S practices.
Storage: Store bags of compound in a dry environment, protected from the weather and out of direct sunlight. Tear bag open from top corner to dispense compound. Unused product which has been mixed with water should be discarded. Unused product in powder format should be stored in original bag: roll the top of the bag to loosely seal, and store in an airtight container.
Health and Safety
Safety Data Sheets are important documents in the construction industry and assist in the continuing focus on occupational health and safety on and off sites.
Installing to Standards
AS/NZS2589: Gypsum linings – Application and Finishing outlines the procedures for jointing and finishing of Gyprock plasterboard in conjunction with additional details contained in Gyprock Technical Literature.
Gyprock makes available resources that provide comprehensive selection, design, installation and maintenance guidance.
Would you like to know more about this product? Please fill out the form below and one of our freindly team members will get back to you shortly.