Wet Area Acrylic Sealant

Create a long lasting, functional seal with Gyprock Wet Area Acrylic Sealant – paintable, flexible and suitable for wet areas.

Typical Applications

Suitable for both residential and commercial construction, Wet Area Acrylic Sealant assists in wet area caulking of penetrations and sealing junctions in areas such as pre-formed shower bases, baths and around plumbing penetrations.

Category: CSR, Adhesives & Sealants
Store availability: Cabramatta, Katoomba
Online Enquiry

Wet Area Acrylic Sealant is white in colour and can also be used as a general purpose gap filler, providing mould and mildew resistance.

It is suitable for use with Hebel, concrete, masonry, brickwork, plasterboard, fibre cement, metal, timber and plastic substrates.

Gyprock Specialty Sealants

Wet Area Acrylic Sealant is part of Gyprock’s range of specialty sealants designed to suit a number of specific applications and performance specifications. Meet the others in the range:

CSR FireSeal provides an effective seal for penetrations, control joints and perimeters with its high acoustic and fire rated properties.

Gyprock Fire Mastic is a flexible, water based acrylic sealant for fire resistant caulking that also acts as an effective acoustic sealant of masonry and plasterboard joints and penetrations such as pipes, conduits and ducts.

Product Options

Wet Area Acrylic Sealant is available in a 450g tube and has a shelf life of 1 year from date of manufacture.

For product availability and to place an order, contact your nearest supplier.

Physical and chemical properties

Specific gravity (H20=1) Approximately 1.55
VOC content Trace

Product Manufacture

Wet Area Acrylic Sealant is manufactured for CSR Gyprock in Australia to stringent product specifications.

Product Handling

Transportation and manual handling: Refer to the Gypsum Board Manufacturers of Australia (GBMA) website for recommended OH&S practices.

Storage: Store unopened tubes below 30°C in a cool dry place away from direct sunlight. Opened tubes may skin and form a lump near the opening. Discard any lumps or skin and remaining product can be used.

Health and Safety

Safety Data Sheets are important documents in the construction industry and assist in the continuing focus on occupational health and safety on and off sites.

Installing to Standards

AS/NZS2589: Gypsum linings – Application and Finishing outlines the procedures for jointing and finishing of Gyprock plasterboard in conjunction with additional details contained in Gyprock Technical Literature.

Resources

Gyprock makes available resources that provide comprehensive selection, design, installation and maintenance guidance.

Product Enquiry

Would you like to know more about this product? Please fill out the form below and one of our freindly team members will get back to you shortly.